+48 32 600 79 89
b2b@qoltec.comCode: 53876 |
EAN code: 5901878538761 |
The efficiency of a solar PV system depends on the selection of the right inverter, or solar inverter. The inverter performs a key function in this system, changing the DC current generated by the solar PV panels into AC current used by household appliances. The off-grid hybrid inverter combines the solar PV system, energy storage and the power grid. During the day, it charges the energy storage from the photovoltaic panels. The energy storage unit powers household appliances from the stored energy during the day, and when the batteries are discharged, it draws energy from the grid. The inverter works in off-grid mode, using excess solar energy to power consumers and charge the battery. In the event of an emergency, current is drawn from the solar PV system to the energy storage and can safely and uninterruptedly ensure the continuous operation of our appliances.
- Pure sine wave inverter,
- automatic restart during power restoration,
- easy-to-read multifunction LCD display,
- 80A MPPT charge controller,
- ability to be powered by mains or generator,
- ability to change AC/Solar charger priority settings via LCD display,
- intelligent charger design for optimal battery performance,
- configurable input voltage range for home appliances and personal computers using the settings on the LCD display panel,
- configurable battery charging current according to devices and personal computers via settings on the LCD display panel,
- protection against overload, overheating, overcharging and short circuit,
- cold start function,
The battery charging inverter uses a state-of-the-art 100A MPPT charge controller to maximize the power drawn from the photovoltaic panels, using advanced maximum power point tracking technology.
Having this feature significantly affects the efficiency of the photovoltaic installation-they can maintain high power even in low sunlight conditions. In addition, the controller controls the battery operation and charging process and protects the battery from damage.
The product is equipped with a multifunctional, easy-to-use LCD display with control panel. Facilitates monitoring of the entire photovoltaic installation . Allows you to configure the input voltage range for home appliances and personal computers or change the priority settings of the AC/Solar charger. In addition, the display records data and informs about failures, reacting accordingly if any of the parameters exceed the norm. If a fault occurs, the inverter shuts down.
Get clean energy with our solar inverters! Product comes with a 24 month warranty from the date of purchase.
Waga netto [kg]: | 5.1 |
Wysokość opakowania [mm]: | 175 |
Szerokość opakowania [mm]: | 350 |
Głębokość / Długość opakowania [mm]: | 410 |
Zawartość zestawu: | Inwerter solarny Kabel komunikacyjny RS232 Instrukcja obsługi Płyta CD Protokół montażu urządzenia Karta gwarancyjna |
Wymiary (G/D x Sz x W): | 348 x 270 x 95 mm |
Temperatura przechowywania: | -15˚C do +60˚C |
Temperatura pracy: | -10˚C ~ +50˚C |
Uwagi: | Wymagamy zamontowania urządzenia przez wykwalifikowanego instalatora posiadającego odpowiednie uprawnienia. W przypadku montażu przez osoby nieuprawnione gwarancja automatycznie wygasa. Dołączony do zestawu protokół jest integralna częścią gwarancji i je |
Informacje dodatkowe: | Możliwość podłączenia dodatkowego modułu wi-fi Nie obsługuje BMS Nie obsługuje baterii LiFePO4 |
Waga brutto [kg]: | 5.96 |
Certyfikat: | CE |
Gwarancja: | 24 miesiące |
Interfejs: | RS232 |
Zmienne napięcie ładowania: | 27VDC |
Kolor obudowy: | Biały, czarny |
Zabezpieczenia: | Przeciwzwarciowe Przed przegrzaniem Przed przeciążeniem Przed przeładowaniem |
Głośność: | 45 dB |
Przebieg napięcia na wyjściu: | Czysta fala sinusoidalna |
Czas przełączenia: | 10 ms (PC) 20 ms (Urządzenia domowe) |
Sprawność: | 95% |
Moc szczytowa: | 6000W |
Częstotliwość pracy: | 50Hz / 60Hz (automatyczne wykrywanie) |
Nominalne napięcie wejściowe: | 230 VAC |
Moc znamionowa: | 3000VA/2400W |
Ilość faz: | Jednofazowy |
Typ: | Off-grid |
Rodzaj ładowania: | MPPT |
Napięcie akumulatora: | 24 VDC |
Napięcie ładowania akumulatora: | 27 VDC |
Chłodzenie: | 2 x wentylator |
Wyświetlacz: | LCD |
Maksymalne napięcie obwodu otwartego panelu fotowoltaicznego: | 450 VDC |
Zakres napięcia pracy MPPT: | 100 ~ 450VDC |
Maksymalny prąd ładowania: | 80 A |
Maksymalna moc panelu fotowoltaicznego: | 3000W |
Maksymalny prąd ładowania akumulatora z PV: | 80A |
Zabezpieczenie przed przeładowaniem akumulatora: | 31VDC |
Producent: | Qoltec |