+48 32 600 79 89
b2b@qoltec.com Stable, reliable and environmentally friendly power supply at any time of day
Qoltec energy storage will significantly increase the functionality of your photovoltaic installation and provide a stable and environmentally friendly power supply. It can efficiently store surplus energy acquired during the day that we are unable to consume at any given time, until it is fully charged for use at a later time when current production ceases or is below demand, e.g. during power cuts. The stored energy is available at all times when the storage is discharged, electricity is drawn from the grid. Surplus energy can also be sent to the grid.
Precise power and voltage regulation, energy independence, real-time monitoring and a wide range of security features
Main functions of Qoltec energy storage :
- You can make the most of the energy you produce and use it at a later time, such as on cloudy days or at night,
- You gain energy independence and security in case of grid failure, the storage will also work well in a place where there is no access to the grid,
- You significantly reduce the effects of overloading the power grid by storing surplus energy,
- The storage regulates power and voltage and removes interference that reduces the quality of the energy produced,
- You support the development of renewable energy sources,
- It has a built-in LiFePO4 lithium-iron-phosphate battery.
Powerful and discharge-resistant LiFePO4 batteries
Qoltec's energy storages are equipped with extremely powerful and deep discharge resistant lithium-iron-phosphate batteries - LiFePO4. The advantage of this battery is undoubtedly its long service life of up to several thousand charge and discharge cycles, as well as its lightness and the lack of memory effect, which causes a loss of actual capacity. LiFePO4 batteries do not pollute the environment, are non-toxic and non-flammable, which increases the safety of their use in photovoltaics.
Easy control of battery level and other parameters
The product features a multifunctional, easy-to-use LCD display with control panel. It allows control and monitoring of the battery status. In addition, the display informs you of failures, reacting accordingly if any parameter exceeds the norm. Combining efficiency with transparency, we provide you with full control of your energy, step by step, on screen, for your convenience.
Cell protection against overheating, overcharging and deep discharge
Advanced BMS :
- Constantly monitors and controls the battery's operating parameters, ensuring optimum performance, even charging and discharging,
- Protects cells from overheating, overcharging and deep discharge, which can damage the battery.
Equipped with a comprehensive security kit to protect your system
UVP protection - protects devices from too low voltage at the output, which affects the stability of connected devices,
SCP protection - is a short circuit protection,
OVP protection - is protection against too high output voltage and damage to connected devices,
OCP protection - is protection against too high current on the line,
OTP protection - is protection against overheating.
Product covered by a 24-month warranty
Our company is committed to providing technical support and customer service, making our guarantee a comprehensive commitment to customer satisfaction for two years from the date of purchase. The included protocol is an integral part of the warranty and is necessary to file a claim for faulty goods within 24 months of purchase. Harvest clean energy with our energy storages!
Producent: | Qoltec |
Głębokość / Długość opakowania [mm]: | 582 |
Szerokość opakowania [mm]: | 680 |
Wysokość opakowania [mm]: | 290 |
Waga netto [kg]: | 54.500 |
Waga brutto [kg]: | 56.000 |
Certyfikat: | CE |
Gwarancja: | 24 miesiące |
Napięcie nominalne: | 51.2V |
Napięcie odcięcia: | 44.80V (0.01C) |
Zmienne napięcie ładowania: | 55.20 V ±0.1V |
Wilgotność względna: | ≤95% wilgotności względnej |
Stopień ochrony: | IP55 |
Kompatybilny z: | 000-PACE RS232 V1.7-2022.10.22 000-PACE RS485 MS V1.0-2018.06.15 RS485: 000-PACE RS485 Modbus V1.1-2017.06.27 001-PYLON RS485 LV V3.5-2019.12.23 002-Growatt RS485 V2.02-2019.07.24 003-Voltronic RS485 Inverter V1.5-2022.01.18 011-VISION RS485 V1.3-2019.07 |
Ilość baterii: | 16 |
Standardowy prąd ładowania: | 20A |
Standardowy prąd rozładowania: | 20A |
Wymiary (G/D x Sz x W): | 580 x 450 x 180 mm |
Zawartość zestawu: | 1 x Magazyn energii LiFePO4 1 x Akcesoria montażowe 1 x Protokół montażu 1 x Instrukcja obsługi |
Typ ogniwa: | LiFePO4 |
Pojemność: | 100Ah |
Napięcie ładowania: | max. 58.4V |
Ilość cykli ładowania: | ≥3000 przy 100% DOD |
Maksymalny prąd ładowania (PV): | 50A |
Maksymalny prąd rozładowania: | 100A |
Komunikacja: | RS485, RS232, CAN |
Kolor obudowy: | Biały, czarny |
Zabezpieczenia: | UVP - chroni przed zbyt niskim napięciem na wyjściu, SCP - to zabezpieczenie przeciwzwarciowe, OVP - to ochrona przed zbyt wysokim napięciem wyjściowym, OCP - to zabezpieczenie przed zbyt wysokim prądem na linii, OTP - to zabezpieczenie przed przegrzaniem |
Zastosowanie: | Przechowywanie nadmiaru energii wytworzonej przez instalację fotowoltaiczne Systemy zasilania awaryjnego |
Zakres temperatury pracy: | Ładowanie : 0˚C ~ +45˚C Rozładowanie : -25˚C ~ +55˚C |
Zakres temperatury przechowywania: | Mniej niż 1 miesiąc : -10˚C ~ +45˚C Mniej niż 3 miesiące : -10˚C ~ +35˚C Ponad 3 miesiące : 0˚C ~ +30˚C |
Informacje dodatkowe: | Wsparcie systemu BMS |
Uwagi: | Wymagamy zamontowania urządzenia przez wykwalifikowanego instalatora posiadającego odpowiednie uprawnienia. W przypadku montażu przez osoby nieuprawnione gwarancja automatycznie wygasa. Dołączony do zestawu protokół jest integralną częścią gwarancji i jes |
Rezystancja wewnętrzna: | ≤40mΩ |